CCTV Camera Bracket |Bracket Mounting| CCTV Holder| Mounting Bracket
Security Camera Bracket
CCTV bracket mounts enable you to find the best possible placement for your cameras.
SGCCTV supplies various types of mounts and brackets for CCTV cameras, including AHD and network IP cameras.
This page contains mounted bracket for dome, box, and weatherproof camera housings.
If you need assistance in choosing the right mounting bracket for your installation, please contact us. We are here to help.
CCTV Bracket Types
Plastic wall bracket specifically designed for IP dome camera.
Metal Ceiling Pendant
Mount for drop-ceilings
Wall mount bracket
Metal wall bracket specifically designed for the IP panoramic camera.
Parapet Wall Mount for PTZ cameras.
Pole Mount Bracket for IP PTZ cameras
Security Camera Brackets Installation
Prior to installation and use of this product, the following WARNINGS should be observed.
1. Installation and servicing should only be done by qualified service personnel and conform to all local codes.
2. Only use replacement parts recommended.
3. The installation method and materials should be capable to supporting four times the weight of the enclosure, pan/tilt, camera and lens combination.
Remove the cover.
Determine the mounting location. Using the mount as a template, mark the feed through hole and keyhole slot positions on the mounting surface.
Drill the feed through holes and pull the wires through the wall. NOTE: Make certain that the mounting surface is able to support four times the combined weight of the mount and camera.
Fasten screws into the mounting surface at the marked keyhole locations. Pull the wires through the feed-through holes in the back of the mount and attach the mount over the heads of the screws. Slide the mount downward to lock into place. Tighten the screws.
Once the mount is fastened securely to the wall, thread the wires through the top feed through holes.
The tilt angle of the camera can be adjusted with a screwdriver by loosening, and then tightening, the screws on the sides of the tilt table.
Width: 718 Px
Height: 516 Px