Card Access Reader, Vandal-proof Reader, Pin and Card Reader, Da188
Door Access Singapore DA188 CHOICE
Anti-vandal case Full programming from the keypad2000 uses, supports Card, PIN, Card + PIN Can be used as a stand-alone keypad backlight keysWiegand 26 input for connection to external readerWiegand 26 output for connection to a controller Adjustable Door Output time, Alarm time, Door Open time
Very low power consumption (30mA) Fast operating speed, <20ms with 2000 usersLock output current short circuit protectionEasy to install and program built-in light-dependent resistor (LDR) for anti-tamper built-in buzzer Red, Yellow and Green LEDs display the working status
|Operating Voltage||DC 12V±10%|
|Card Reading Distance||3-6 cm|
|Idle Current||25±5 mA|
|Lock Output Load||Max 3A|
|Alarm Output Load||Max 20A|
|Operating Temperature||-45~60 degree|
|Operating Humidity||10%- 90% RH|
|Waterproof||Conforms to IP68|
|Adjustable Door Relay time||0 -99 seconds|
|Adjustable Alarm Time||0- 3 minutes|
|Wiegand Interface||Wiegand 26 bit|
|Wiring Connections||Electric Lock, Exit Button, External Alarm, External reader|
Perfect design, Metal Case with Luminous keypad, anti-vandal
WG26 output can be used as an Access reader.
Access ways : cards ,code,card &code.
Low power: static current less than 30mA.
Support keypad operating alone, unrelated with card
Open-door time: 0~99 seconds(adjustable)
Users can reset private passwords.
Search fast less than 0.1s.
With standard Wiegand interface, Wg26 for card or Wg34 for codes.
Use the keypad to delete lost cards for safety.
Short-circuit protect: when relay or alarm output appears short-circuit, the Output will close automatically within 100μS.